Product Description
Generator Pulley Transmission Triangle V belt Rubber Fan Wrapped Narrow Banded Joint V belt
Our pulley v belt have competite price and CZPT quality
Main conveyor belt products:
1) Wrapped V-belt (K, M, A, B, C, D, E; 3L, 4L, 5L, SA, SB, SC)
2) Narrow V-belt (SPZ, SPA, SPB, SPC; 3V, 5V, 8V)
3) Cutting edge V-belt (AX, BX, CX)
4) Cutting edge narrow V-belt (XPZ, XPA, XPB, XPC)
5) Timing belt
6) Duplex V-belt
7) V-belt for agricultural machinery-dimensions
8) V-belt for clothes washing machine
9) Automotive V-belt
10) Other types available upon request
V belt, v belt fan belt, CZPT v belt, link v belt, v belt for washing machine, CZPT v belts, adjustable v belt, micro v belts, double poly v belt, CZPT v belt, micro rib v belts, hexagonal v belt, kevlar v belts, v belt distributors, poly v belt pulleys, large v belt
If you don’t inform us in advance, then we will produce the belt as per Li length
Features:
1) With special frames, our v-belts are resistant to heat, oil, fatigue, aging and friction.
2) Features: Large power, high speeds, long usage lives, small distortion, small sizes…
3) Applications: Electric motors, internal combustion engines, power transmission equipment.
4) We can provide these products in various sizes, and welcome buyer’s specifications.
Now we introduce belt as follows:
V-belt specialty with a core structure, rope core structure of the two, respectively, by wrapping cloth, top rubber, tensile body and the end of plastic is composed of 4 parts. The the rope core structure of the V-belt manufacturing convenient, general tensile strength, low prices, good toughness widely used special with a core structure of the V-belt, high strength, suitable for high speed occasions.
V-belt classification
The ordinary with core V-belt
Most of the V-belt with the core of the ordinary with core wire rope core, a small part of the carcass band core. Both with core structure are the fiber twisting or preparation, clip each fiber in the V-belt operation with core gradually elongation at break. Therefore, the use of ordinary V-belt line rope core and ply with core production can only be used in low-load transmission.
The special with core V-belt
The special with core V-belt with core polymer polyester steel brown silk the overall solid core rod with a core structure. As a whole due polyester steel brown silk solid core the untwisted structure, good adhesion, flex resistance, high strength, and do not run long, not only greatly improve the life of the rubber belts, but also the life of the belt body balanced, enterprises can maintenance-free, periodic replacement. On November 22 2571, the steel brown silk polyester skeleton material through the identification of the Committee of Experts: Brown silk with polyester steel structural skeleton as a transmission belt skeleton material with traditional polyester cord, hard rope, aramid fiber rope material belt life increased by 5-10 times compared to an international advanced level. Special with core belt ordinary belt high load heavy horsepower drive system frequently replaced much of the the world heavy industry companies favor.
V-belt applications FEATURES
Advantage
1, simple structure, manufacture, install less precision, easy maintenance, V-belt for larger occasions in the 2 axes of the central office
2, smooth transmission, low noise, cushioning shock absorbing effect
3, overload occurs, the drive belt from slipping on the pulleys can be prevented damage to the weak parts, from a security role
HangZhou CZPT Industry Co., Ltd. is a specialized supplier of a full range of chains, sprockets, gears, gear racks, v belt pulley, timing pulley, V-belts, couplings, machined parts and so on.
Due to our sincerity in offering best service to our clients, understanding of your needs and overriding sense of responsibility toward filling ordering requirements, we have obtained the trust of buyers worldwide. Having accumulated precious experience in cooperating with foreign customers, our products are selling well in the American, European, South American and Asian markets.Our products are manufactured by modern computerized machinery and equipment. Meanwhile, our products are manufactured according to high quality standards, and complying with the international advanced standard criteria.
With many years’ experience in this line, we will be trusted by our advantages in competitive price, one-time delivery, prompt response, on-hand engineering support and good after-sales services.
Additionally, all our production procedures are in compliance with ISO9001 standards. We also can design and make non-standard products to meet customers’ special requirements. Quality and credit are the bases that make a corporation alive. We will provide best services and high quality products with all sincerity. If you need any information or samples, please contact us and you will have our soon reply.
FAQ:
Q1: Are you trading company or manufacturer ?
A: We are factory.
Q2: How long is your delivery time and shipment?
1.Sample Lead-times: generally 10 workdays.
2.Production Lead-times: 20-40 workdays after getting your deposit.
Q3. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery.
Q4: What is your advantages?
1. Manufacturer,the most competitive price and good quality.
2. Perfect technical engineers give you the best support.
3. OEM is available.
4. Rich stock and quick delivery.
Q5. If you can’t find the product on our website,what do you next?
Please send us inquiry with product pictures and drawings by email or other ways and we’ll check.
| Type: | Rubber |
|---|---|
| Material: | Rubber |
| Inside Material: | Fabric |
| Customization: |
Available
| Customized Request |
|---|
.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}
| Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
|
Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Are there any specific guidelines for aligning pulleys and V-belts?
Proper alignment between pulleys and V-belts is essential to ensure smooth operation, minimize wear, and maximize the efficiency of the belt drive system. Here are some specific guidelines for aligning pulleys and V-belts:
- Parallel Alignment:
- Angular Alignment:
- Alignment Tools:
- Adjustment Methods:
- Regular Inspections:
- Manufacturer Recommendations:
The pulleys should be aligned parallel to each other, meaning that the axes of the pulleys should be in the same plane. This ensures that the V-belt runs straight and evenly between the pulleys. Misalignment can cause the belt to run at an angle, leading to increased wear and reduced efficiency.
In addition to parallel alignment, the pulleys should be aligned angularly. This means that the pulley faces should be perpendicular to the belt’s direction of travel. Angular misalignment can cause the belt to twist and create uneven tension, resulting in increased wear and potential belt failure.
To achieve proper alignment, various alignment tools can be used, such as straightedges, laser alignment tools, or alignment software. These tools help in measuring and adjusting the alignment of pulleys, ensuring precise parallel and angular alignment.
To adjust the alignment of pulleys, different methods can be employed. Common adjustment methods include shimming, moving the pulley on its shaft, or using adjustable pulleys. The specific method depends on the type of pulley and the adjustment capabilities of the system.
Regular inspections are crucial to identify and correct any misalignment issues promptly. Inspect the pulleys visually and check for any signs of misalignment, such as uneven belt wear, belt tracking issues, or abnormal belt noise. If misalignment is detected, take corrective measures to realign the pulleys.
Always refer to the manufacturer’s guidelines and specifications for pulley alignment. Manufacturers often provide specific alignment tolerances and recommendations for their products, considering factors such as belt type, load, and operating conditions. Follow these recommendations to ensure proper alignment and optimize the performance of the belt drive system.
By following these guidelines for aligning pulleys and V-belts, you can minimize wear, reduce the risk of belt failure, and maximize the efficiency and lifespan of the belt drive system.
Are there any safety considerations when working with V-belts?
Working with V-belts involves certain safety considerations to ensure the well-being of personnel and the proper functioning of the belt drive system. Here are some important safety considerations when working with V-belts:
- Lockout/Tagout: Before performing any maintenance or adjustment on a belt drive system, it is crucial to follow proper lockout/tagout procedures. Lockout/tagout involves isolating the power source, de-energizing the equipment, and securing it with locks or tags to prevent unintentional startup or release of stored energy. This ensures the safety of personnel working on or near the V-belts.
- Personal Protective Equipment (PPE): When working with V-belts, appropriate personal protective equipment should be worn as per the specific tasks and potential hazards. This may include safety glasses, gloves, hearing protection, and protective clothing to safeguard against potential injury from flying debris, pinch points, or contact with rotating parts.
- Training and Familiarity: Ensure that personnel working with V-belts are adequately trained on safe work practices, including proper maintenance procedures, tensioning techniques, and the use of tools and equipment. Familiarity with the specific belt drive system and understanding the potential hazards associated with V-belts is essential for safe operation.
- Machine Guarding: Install appropriate machine guarding to prevent accidental contact with moving V-belts and exposed pulleys. Guards should be designed to prevent access to hazardous areas and comply with relevant safety regulations. Regularly inspect and maintain the guards to ensure their effectiveness.
- Tensioning and Adjustment: Follow proper procedures when tensioning or adjusting V-belts. Use the recommended tools and techniques specified by the manufacturer. Improper tensioning can lead to belt slippage, increased wear, and potential accidents. Avoid working near or reaching into the belt drive system while it is in operation.
- Proper Lifting and Handling: V-belts can be heavy and awkward to handle, especially in larger sizes. When lifting or handling V-belts, use proper lifting techniques and equipment to prevent strains or injuries. Avoid placing excessive stress on the belts during installation or removal.
- Maintaining Cleanliness: Keep the work area clean and free from debris, oil, or other contaminants that may affect traction or create slip hazards. Clean up any spills promptly and use appropriate cleaning methods to avoid slipping or tripping accidents.
- Manufacturer’s Guidelines: Adhere to the manufacturer’s guidelines, instructions, and specifications for the installation, tensioning, maintenance, and replacement of V-belts. Manufacturers provide valuable information on safe operating practices, recommended tension ranges, load capacities, and other relevant safety considerations specific to their V-belt products.
By following these safety considerations when working with V-belts, you can help mitigate potential hazards, reduce the risk of accidents, and ensure the safe and efficient operation of the belt drive system.
What are the signs of a worn or damaged V-belt that needs replacement?
A worn or damaged V-belt can lead to decreased performance, increased energy consumption, and potential equipment failure. Recognizing the signs of a worn or damaged V-belt is important for timely replacement and preventing further damage. Here are some common signs to look out for:
- Visible wear: Inspect the V-belt for visible signs of wear, such as fraying, cracking, or glazing. Excessive wear indicates that the belt has reached the end of its service life and should be replaced.
- Chunking or missing pieces: If the V-belt shows signs of chunking or has missing pieces, it is a clear indication of severe damage. This can occur due to excessive tension, overloading, or prolonged use beyond the belt’s capacity.
- Excessive noise: A worn or damaged V-belt may produce noticeable noise during operation. This can be in the form of squealing, screeching, or rumbling sounds. The noise is often caused by slipping, misalignment, or belt degradation.
- Slippage: If the V-belt slips on the pulleys, resulting in reduced power transmission or inconsistent operation, it indicates a problem. Slippage can occur due to incorrect tension, pulley misalignment, or insufficient grip caused by belt wear.
- High heat or burning smell: Excessive heat generated by a V-belt can indicate friction caused by belt slippage or misalignment. If you notice a burning smell or feel excessive heat near the belt drive system, it is a sign of potential belt damage.
- Loss of tension: If the V-belt consistently loses tension and requires frequent readjustment, it indicates wear or elongation. Over time, the belt may stretch and lose its original tension, resulting in reduced power transmission efficiency.
- Reduced power transmission: A worn or damaged V-belt may struggle to transmit the required power, leading to decreased equipment performance. This can result in slower operation, reduced torque, or inability to handle the load.
- Visible cracks or separation: Cracks or separation in the V-belt’s rubber material are clear signs of damage. These can occur due to age, exposure to harsh environments, or chemical degradation. Cracked or separated belts should be replaced immediately.
- Shortened belt life: If a V-belt consistently fails or requires replacement sooner than its expected service life, it indicates a problem. Factors such as incorrect tensioning, misalignment, or excessive load can contribute to premature belt failure.
If you observe any of these signs in a V-belt, it is recommended to replace the belt promptly. Continuing to use a worn or damaged V-belt can lead to further damage, increased downtime, and potential equipment failure. Regular maintenance and inspections are essential for identifying and addressing these signs early, ensuring the reliability and longevity of the V-belt system.
editor by CX 2023-12-06