Product Description
3VX 5VX 8VX Rubber Narrow Raw Edge Cogged V Belts
Narrow Raw edge V-belt, also known as narrow V-belt or narrow V-belt, is a type of transmission belt with a specific cross-sectional shape, presenting a cut edge V-shape. It is usually made of rubber or synthetic materials and has high wear resistance and tensile strength.
Narrow V-belts are widely used in mechanical engineering to transmit power and drive mechanical equipment, especially suitable for small drive systems and some precision mechanical devices. Its compact design, efficient power transmission, and lower noise levels make it very useful in limited space or applications that require high-speed transmission.
| Product Name | Narrow Raw Edge V Belts |
| Material | Neoprene Rubber(CR) |
| Series | 3VX(9N)/5VX(15N)/8VX(25N) |
| Types | Narrow Raw Edge V Belts |
| Usage | Power Transmission System |
| Color | Black |
| Brand | COMRAY/OEM |
Narrow V-belts have more advantages compared to regular V-belts. Its transmission power is high, strength is high, elongation is small, efficiency is high, and service life is long, and it can adapt to the transmission requirements of high speed ratio and short center distance. At the same time, it also has excellent characteristics such as oil resistance and anti-static. The relative height of the narrow V-belt is about 0.9, and the top surface of the belt is arched, so that the core of the belt is still arranged in a straight and flat line after being subjected to force, ensuring that each wire rope is evenly stressed. The 2 sides are concave, and the curved side becomes straight, which can better fit the wheel groove and increase friction.
There are 2 types of narrow V-belt systems: pitch width system and top width system, also known as “metric” or “imperial” narrow V-belt. Its cross-section is trapezoidal, with a height to pitch width ratio of 0.9, which is greater than the 0.7 of a regular V-belt. Therefore, it can increase the contact area between the working surface and the wheel groove, thereby improving transmission power and efficiency..
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Standard or Nonstandard: | Standard |
|---|---|
| Application: | Textile Machinery, Garment Machinery, Conveyer Equipment, Packaging Machinery, Electric Cars, Motorcycle, Food Machinery, Marine, Mining Equipment, Agricultural Machinery, Car |
| Feature: | Flame-Retardant, Anti-Static, Oil-Resistant, Cold-Resistant, Corrosion-Resistant, Heat-Resistant, Alkali-Resistant, Skid-Resistance, Wear-Resistant, Acid-Resistant, High Temperature-Resistance |
| Samples: |
US$ 5/Piece
1 Piece(Min.Order) | Order Sample |
|---|
| Customization: |
Available
| Customized Request |
|---|
.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
|
Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Are there any specific guidelines for aligning pulleys and V-belts?
Proper alignment between pulleys and V-belts is essential to ensure smooth operation, minimize wear, and maximize the efficiency of the belt drive system. Here are some specific guidelines for aligning pulleys and V-belts:
- Parallel Alignment:
- Angular Alignment:
- Alignment Tools:
- Adjustment Methods:
- Regular Inspections:
- Manufacturer Recommendations:
The pulleys should be aligned parallel to each other, meaning that the axes of the pulleys should be in the same plane. This ensures that the V-belt runs straight and evenly between the pulleys. Misalignment can cause the belt to run at an angle, leading to increased wear and reduced efficiency.
In addition to parallel alignment, the pulleys should be aligned angularly. This means that the pulley faces should be perpendicular to the belt’s direction of travel. Angular misalignment can cause the belt to twist and create uneven tension, resulting in increased wear and potential belt failure.
To achieve proper alignment, various alignment tools can be used, such as straightedges, laser alignment tools, or alignment software. These tools help in measuring and adjusting the alignment of pulleys, ensuring precise parallel and angular alignment.
To adjust the alignment of pulleys, different methods can be employed. Common adjustment methods include shimming, moving the pulley on its shaft, or using adjustable pulleys. The specific method depends on the type of pulley and the adjustment capabilities of the system.
Regular inspections are crucial to identify and correct any misalignment issues promptly. Inspect the pulleys visually and check for any signs of misalignment, such as uneven belt wear, belt tracking issues, or abnormal belt noise. If misalignment is detected, take corrective measures to realign the pulleys.
Always refer to the manufacturer’s guidelines and specifications for pulley alignment. Manufacturers often provide specific alignment tolerances and recommendations for their products, considering factors such as belt type, load, and operating conditions. Follow these recommendations to ensure proper alignment and optimize the performance of the belt drive system.
By following these guidelines for aligning pulleys and V-belts, you can minimize wear, reduce the risk of belt failure, and maximize the efficiency and lifespan of the belt drive system.
What are the factors that affect the lifespan and efficiency of V-belts?
The lifespan and efficiency of V-belts can be influenced by several factors. Here are the key factors that can affect the performance of V-belts:
- Belt Tension:
- Belt Alignment:
- Belt Condition:
- Maintenance and Lubrication:
- Operating Conditions:
- Load and Application:
Proper belt tension is crucial for the longevity and efficiency of V-belts. Insufficient tension can cause slippage, while excessive tension can lead to excessive load on the belt and other components. It is important to follow the manufacturer’s recommendations for the correct tension range.
Poor belt alignment can cause uneven wear, increased friction, and reduced efficiency. Misaligned pulleys can cause the belt to run at an angle, resulting in premature wear and potential failure. Regularly check and adjust the alignment of pulleys to ensure proper belt tracking.
The condition of the V-belt itself is a significant factor in its lifespan and efficiency. Regularly inspect the belt for signs of wear, cracks, fraying, or glazing. Replace worn-out or damaged belts promptly to avoid further issues.
Proper maintenance and lubrication can significantly extend the lifespan of V-belts. Adequate lubrication reduces friction and heat buildup, which helps to prevent premature wear and cracking. Follow the manufacturer’s recommendations for lubrication intervals and use the appropriate lubricant.
Operating conditions, such as temperature, humidity, and exposure to chemicals or contaminants, can affect the performance of V-belts. Extreme temperatures can cause the belt material to deteriorate, while exposure to chemicals or contaminants can lead to belt degradation. Ensure that the operating conditions are within the recommended range for the specific V-belt.
The load and application requirements also impact the lifespan and efficiency of V-belts. Excessive loads or improper application can cause excessive stress on the belt, leading to premature failure. Ensure that the V-belt is appropriately sized and rated for the specific load and application.
By considering these factors and implementing proper maintenance practices, such as regular inspections, correct tensioning, alignment checks, and appropriate lubrication, you can maximize the lifespan and efficiency of V-belts in your applications.
How do you properly install and tension a V-belt for optimal performance?
Proper installation and tensioning of a V-belt are crucial for achieving optimal performance and ensuring its longevity. Here are the steps to properly install and tension a V-belt:
- Select the appropriate V-belt: Determine the correct V-belt size and type based on the application requirements, including pulley diameters, power transmission needs, and environmental factors.
- Clean the pulleys: Ensure that the pulleys are clean and free from any contaminants, such as dirt, debris, or oil. Clean the pulley grooves using a brush or compressed air to ensure proper belt grip.
- Inspect the pulleys: Check the pulleys for any signs of wear, damage, or misalignment. Replace or repair any damaged or worn-out pulleys before proceeding with the installation.
- Place the V-belt on the pulleys: Position the V-belt on the pulleys, ensuring that it is properly seated in the pulley grooves. Make sure the belt is correctly aligned with the pulleys and is not twisted or kinked.
- Adjust the center distance: If necessary, adjust the center distance between the driving and driven pulleys to the recommended specifications provided by the manufacturer. This ensures proper belt tension and alignment.
- Tension the V-belt: The correct tension is crucial for optimal V-belt performance. Use a tension gauge to measure the belt’s tension. Follow the manufacturer’s guidelines or recommended tension specifications for the specific V-belt type and application.
- Apply tension gradually: Apply tension to the V-belt gradually and evenly. Avoid sudden or excessive tensioning, as it can lead to belt damage or pulley misalignment. Follow the recommended tensioning procedure provided by the manufacturer.
- Check the belt tension: After tensioning the belt, recheck the tension using a tension gauge. Ensure that the tension falls within the recommended range for the specific V-belt type and application. Adjust the tension if necessary.
- Verify alignment: Confirm that the pulleys are aligned properly. Check for any misalignment or belt tracking issues. Make adjustments as required to ensure the belt runs smoothly and centrally on the pulleys.
- Perform a test run: After installation and tensioning, perform a test run of the V-belt system. Monitor the belt’s performance, including proper grip, minimal vibration, and absence of noise. Address any issues or abnormalities promptly.
It is important to refer to the manufacturer’s guidelines and specifications for the specific V-belt type and application. They may provide additional instructions or considerations for installation and tensioning.
By following these steps and adhering to the manufacturer’s recommendations, you can ensure the proper installation and tensioning of a V-belt, leading to optimal performance, reduced wear, and extended belt life.
editor by CX 2024-04-17