Product Description
Our D type Rubber V Belt have competite price and CZPT quality
Main conveyor belt products:
1) Wrapped V-belt (K, M, A, B, C, D, E; 3L, 4L, 5L, SA, SB, SC)
2) Narrow V-belt (SPZ, SPA, SPB, SPC; 3V, 5V, 8V)
3) Cutting edge V-belt (AX, BX, CX)
4) Cutting edge narrow V-belt (XPZ, XPA, XPB, XPC)
5) Timing belt
6) Duplex V-belt
7) V-belt for agricultural machinery-dimensions
8) V-belt for clothes washing machine
9) Automotive V-belt
10) Other types available CZPT
V belt, v belt fan belt, CZPT v belt, link v belt, v belt for washing machine, CZPT v belts, adjustable v belt, micro v belts, double poly v belt, CZPT v belt, micro rib v belts, hexagonal v belt, kevlar v belts, v belt distributors, poly v belt pulleys, large v belt
If you don’t inform us in advance, then we will produce the belt as per Li length
Features:
1) With special frames, our v-belts are resistant to heat, oil, fatigue, aging and friction.
2) Features: Large power, high speeds, long usage lives, small distortion, small sizes…
3) Applications: Electric motors, internal combustion engines, power transmission equipment.
4) We can provide these products in various sizes, and welcome buyer’s specifications.
Now we introduce belt as follows:
V-belt specialty with a core structure, rope core structure of the two, respectively, by wrapping cloth, top rubber, tensile body and the end of plastic is composed of 4 parts. The the rope core structure of the V-belt manufacturing convenient, general tensile strength, low prices, good toughness widely used special with a core structure of the V-belt, high strength, suitable for high speed occasions.
V-belt classification
The ordinary with core V-belt
Most of the V-belt with the core of the ordinary with core wire rope core, a small part of the carcass band core. Both with core structure are the fiber twisting or preparation, clip each fiber in the V-belt operation with core gradually elongation at break. Therefore, the use of ordinary V-belt line rope core and ply with core production can only be used in low-load transmission.
The special with core V-belt
The special with core V-belt with core polymer polyester steel brown silk the overall solid core rod with a core structure. As a whole due polyester steel brown silk solid core the untwisted structure, good adhesion, flex resistance, high strength, and do not run long, not only greatly improve the life of the rubber belts, but also the life of the belt body balanced, enterprises can maintenance-free, periodic replacement. On November 22 2571, the steel brown silk polyester skeleton material through the identification of the Committee of Experts: Brown silk with polyester steel structural skeleton as a transmission belt skeleton material with traditional polyester cord, hard rope, aramid fiber rope material belt life increased by 5-10 times compared to an international advanced level. Special with core belt ordinary belt high load heavy horsepower drive system frequently replaced much of the the world heavy industry companies favor.
V-belt applications FEATURES
Advantage
1, simple structure, manufacture, install less precision, easy maintenance, V-belt for larger occasions in the 2 axes of the central office
2, smooth transmission, low noise, cushioning shock absorbing effect
3, overload occurs, the drive belt from slipping on the pulleys can be prevented damage to the weak parts, from a security role
.
/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Business Type: | Manufacturer |
|---|---|
| Pitch: | 38.1mm |
| Pin: | Stainless Steel |
| Certification: | ISO9001:2008 |
| Brand Name: | Ll |
| Place of Origin: | Shanghai, China |
| Customization: |
Available
| Customized Request |
|---|
What are the best practices for storing spare V-belts to maintain their quality?
Proper storage of spare V-belts is essential to maintain their quality and ensure their performance when they are needed. Here are some best practices for storing spare V-belts:
- Clean and Dry Environment:
- Temperature and Humidity Control:
- Avoid Direct Sunlight:
- Avoid Bending or Twisting:
- Proper Packaging:
- First-In-First-Out (FIFO) Rotation:
- Regular Inspections:
Store the V-belts in a clean and dry environment to prevent contamination and moisture damage. Avoid storing them in areas where they may be exposed to dirt, dust, chemicals, or excessive humidity. Keeping the storage area clean and well-ventilated helps preserve the integrity of the belts.
Ensure that the storage area has controlled temperature and humidity levels. Extreme temperatures or high humidity can adversely affect the belt material, leading to deterioration or loss of elasticity. Ideally, the temperature should be kept within a range of 10°C to 30°C (50°F to 86°F), and the humidity should be maintained at around 40% to 70%.
Direct exposure to sunlight can cause the belt material to degrade over time. Store the spare V-belts away from direct sunlight or any other sources of ultraviolet (UV) radiation. If possible, use opaque containers or covers to shield the belts from light.
Do not store the V-belts in a way that causes excessive bending or twisting. This can result in permanent deformation or stress on the belts, compromising their performance. Keep the belts flat or hang them in a manner that maintains their original shape.
If the V-belts are stored in packaging, ensure that the packaging is intact and provides adequate protection against external elements. Avoid storing the belts in damaged or torn packaging, as it may expose them to contaminants or moisture.
Implement a first-in-first-out (FIFO) rotation system for spare V-belts. This means using the oldest belts first and replenishing the stock with newly purchased belts. This practice helps prevent the storage of belts for extended periods, reducing the risk of degradation or obsolescence.
Periodically inspect the stored V-belts for any signs of damage, such as cracks, brittleness, or deterioration. If any issues are detected, replace the affected belts promptly to ensure that only high-quality spare belts are available for use when needed.
By following these best practices, you can maintain the quality and performance of spare V-belts, ensuring that they are ready for use and prolonging their service life.
What maintenance practices are recommended for prolonging the lifespan of V-belts?
Implementing regular maintenance practices is crucial for extending the lifespan of V-belts and ensuring their optimal performance. Here are some recommended maintenance practices:
- Visual inspections: Conduct regular visual inspections of the V-belts to identify any signs of wear, damage, or misalignment. Look for cracks, fraying, glazing, or any visible abnormalities. Inspect the pulleys for wear or damage as well.
- Tension checks: Check the tension of the V-belts on a periodic basis using a tension gauge. Ensure that the belts are within the recommended tension range specified by the manufacturer. Incorrect tension can lead to belt slippage, accelerated wear, and decreased power transmission efficiency.
- Pulley alignment: Verify that the pulleys are correctly aligned to prevent unnecessary stress and wear on the V-belts. Misaligned pulleys can cause belt slippage, uneven load distribution, and premature failure. Adjust the pulleys as necessary to maintain proper alignment.
- Cleanliness: Keep the V-belts and pulleys clean and free from dirt, debris, oil, or other contaminants. Regularly clean the belt drive system to prevent the accumulation of particles that can affect belt grip and performance.
- Environmental considerations: Evaluate the operating environment for factors that can impact the V-belts, such as temperature extremes, humidity, or exposure to chemicals. Take appropriate measures, such as implementing ventilation or using heat-resistant belts, to mitigate adverse environmental effects.
- Load monitoring: Ensure that the V-belts are not subjected to excessive loads beyond their capacity. Monitor the load requirements of the application and consider factors such as torque, horsepower, and operating conditions. Overloading can lead to accelerated wear and premature belt failure.
- Timely replacements: Establish a preventive maintenance schedule for V-belt replacements based on the manufacturer’s recommendations and the observed wear patterns. Replace worn or damaged V-belts promptly to prevent unexpected failures and minimize downtime.
- Proper storage: If spare V-belts are kept in stock, store them in a clean, dry, and temperature-controlled environment to avoid deterioration. Follow the manufacturer’s instructions for proper storage conditions.
- Training and documentation: Ensure that maintenance personnel receive proper training on V-belt maintenance procedures and safety precautions. Keep detailed records of maintenance activities, including inspections, tension measurements, and replacements, for future reference and tracking.
By implementing these maintenance practices, you can significantly prolong the lifespan of V-belts, reduce the risk of unexpected failures, and optimize the performance of the belt drive system. Regular maintenance not only extends the life of the V-belts but also allows for early detection of potential issues, enabling timely corrective actions to be taken.
How do you measure and select the right size of V-belt for a specific application?
When selecting the right size of V-belt for a specific application, it is important to consider factors such as the pulley diameters, center distance between the pulleys, power requirements, and the desired operating speed. Here is a step-by-step guide on how to measure and select the appropriate V-belt size:
- Identify the pulley diameters: Measure the diameter of both the driving and driven pulleys. Make sure to measure the diameter at the highest point of the pulley groove where the belt rides.
- Determine the center distance: Measure the distance between the center points of the driving and driven pulleys. This is the center distance and it plays a crucial role in determining the appropriate V-belt length.
- Calculate the pitch diameter: The pitch diameter is the effective diameter where the belt contacts the pulley. It can be calculated using the following formula: Pitch Diameter = (Driving Pulley Diameter + Driven Pulley Diameter) / 2.
- Consider the power requirements: Determine the amount of power that needs to be transmitted by the V-belt. This can be in the form of horsepower (HP) or kilowatts (kW). Refer to the manufacturer’s guidelines or engineering specifications to ensure the selected V-belt can handle the required power.
- Choose the appropriate V-belt type: Based on the calculated pitch diameter, center distance, and power requirements, select the type of V-belt that is suitable for the specific application. Consider factors such as load capacity, speed capability, and environmental conditions.
- Refer to V-belt manufacturer’s catalogs: Consult the manufacturer’s catalogs or online resources to find the available V-belt sizes and corresponding part numbers. Cross-reference the calculated parameters with the provided charts or tables to identify the appropriate V-belt size.
- Verify the selection: Double-check the selected V-belt size against the calculated parameters to ensure accuracy. If possible, consult with a technical expert or the manufacturer’s support team to validate the selection.
It is important to note that V-belt sizes are standardized and typically follow specific designations, such as the Classical V-belt designation (e.g., A, B, C, D) or the metric designation (e.g., SPZ, SPA, SPB, SPC). These designations indicate different belt widths and lengths.
In summary, measuring and selecting the right size of V-belt for a specific application involves identifying the pulley diameters, determining the center distance, calculating the pitch diameter, considering the power requirements, choosing the appropriate V-belt type, referring to manufacturer’s catalogs, and verifying the selection. Following these steps will help ensure the proper functioning and longevity of the V-belt in the intended application.
editor by CX 2024-01-03